Description

The Deep Fake lives up to its name. Designed for stability and quick edge-to-edge control in all conditions. With a Directional Extra Camber profile this board is built for stability and pop while giving just enough rise in the nose to float on those deeper days. The Deep Fake is designed to be ridden in a standard length, no downsize needed. The Tapered Linear Quadratic Sidecut is designed for smooth turn initiation and powerful grip through turns without washing out. Deep Fake features Metal Slim Wall construction, a section of titanal metal layered with urethane running the edge of the board, increasing dampening, durability, and responsiveness. This is a premium all-mountain board and features RIDE’s Performance Core, Carbon Array 5 , Sintered Stone Ground Race Base, and all new bio-resin. Deep Fake is built for riders that take advantage of all snow conditions while staying under the radar.

Niveau d’exprience

Intermdiaire, Confirm

Ractivit

Dynamique

Disponible en large

Oui

Linear Quadratic Sidecut:

A directional sidecut utilizing Quadratic curvature from the tip to the rear insert pack, then progressing into a linear section into the tail. This creates smooth catch-free turn initiation and powerful support through the turn exit without losing grip.

Standard Top Sheet Edges:

Durable Urethane topsheet material with graphics only RIDE can bring you.

Pre-Cured Glass Fiberglass:

USA-made pre-cured fiberglass optimizes glass to resin ratios to create the most consistent flex pattern possible. No other glass provides this level of stability and control.

Performance Core:

High strength Aspen is combined with Bamboo and lightweight Paulownia wood to provide the perfect balance of strong and light.

Sintered Low Friction Race Base:

The highest grade carbon-infused sintered base material available. Designed for speed.

Carbon Array Laminates:

This power distribution technology provides total board control in every stance location. Widespread carbon stringers placed at the binding zone gather input from any stance width and all pressure angles. Rider input is then channeled to the opposing contact point for maximum board control. Offered in two levels of technology, 3 & 5.

Impact Plates Laminates:

Added underneath each binding area to improve compressive strength and prevent board breaks where it matters most. Offered in two levels, Single and Double.

Metal Slim Walls:

Metal Slim Walls utilize full-length Titanal Aluminum strips laminated into a urethane composite sandwich. Providing superior edge hold, more efficient energy transfer, and unbeatable durability. Metal Slim Walls provide race board performance by damping vibration and maintaining edge-hold while providing a playful flex pattern and responsive snap between turns. This groundbreaking technology is the first of its kind in the industry and solidifies RIDE as the leader in 3D and composite sidewall engineering.

Size Eff-Edge Waist width Sidecut entry radius Sidecut focus radius Sidecut exit radius Tip width Tail width Insert Set Back Insert Set Back Ref. Stance Ref. Stance Rider weight Rider weight (mm) (mm) (m) (m) (m) (mm) (mm) (inches) (mm) (inches) (mm) (lbs) (kg) 144 1088 240 8.6 6.1 – 284 278 -0.75 -19 19 483 60 – 160 27 – 73 148 1126 243 9.1 6.3 – 289 283 -0.75 -19 20 508 75 – 165 34 – 75 151 1152 246 9.3 6.4 – 293 287 -0.75 -19 21 533 100 – 180 45 – 82 155 1177 249 9.6 6.6 – 297 291 -0.75 -19 22 559 115 – 195 52 – 88 157 1190 251 9.8 6.7 – 299 293 -0.75 -19 22 559 120 – 200 55 – 91 159 1203 252 10.0 6.7 – 301 295 -0.75 -19 22 559 125 – 205 57 – 93 162 1228 256 10.5 6.7 – 306 300 -0.75 -19 22 559 130 – 210 59 – 95 157W 1177 259 9.6 6.7 – 307 301 -0.75 -19 22